10 Best Tips On How To Clean Snorkel Gear

Spread the love

Top 10 Best Tips On How To Clean and disinfect a Snorkeling Gear

One of the most spectacular excursions on this magnificent world is snorkeling! Exploring the underwater environment and all of those animals is made possible with snorkeling equipment.

Depending on how frequently you want to go snorkeling, it is frequently less expensive to buy your own snorkeling gear. It may be more expensive to purchase your own mask, tube, and fins than to rent them twice.

It is essential to clean and maintain your snorkeling gear if you possess it. To keep your gear in top condition and prepared for every trip so you may experience the vast oceanic delights, follow the instructions listed below. It’s easy to learn how to clean snorkeling gear. To get rid of any salt water, sand, or other debris, the equipment must be cleaned.

Read Also: Top 10 Costa Rica Locations For Snorkeling and Scuba Diving

Getting rid of any salt water, sand, shell pieces, seaweed, and other waste is the aim of equipment cleaning. Your equipment might become contaminated and even destroyed if anything is left on it.

It will substantially increase the equipment’s lifespan and keep you safe if you learn how to properly clean your snorkeling gear and do so after each expedition. When you’re finished snorkeling, at the very least, clean your equipment in fresh water and let it air dry thoroughly in a shaded area.

How Should Your Snorkeling Gear Be Cleaned?

The proper way to clean snorkeling gear should be known to all snorkelers. Cleaning your gear after diving in the ocean is crucial since saltwater deteriorates snorkeling equipment more quickly than freshwater.

 

You should constantly rinse your equipment with fresh water and let it dry out of the sun, as I said above. After a dive in freshwater, even!

Many diving sites, beaches, and even boats include a freshwater hose or shower that you may use to quickly rinse out your equipment before giving it a more thorough cleaning at home. Your snorkeling gear may be thoroughly cleaned by soaking it in warm water with a little dish soap or detergent. Rub away trash while submerged by using your hands and perhaps a soft sponge. Thoroughly rinse the equipment, then allow it to air dry in the shade.

It might be extremely easy to learn how to clean snorkeling equipment. For more thorough instructions, we divide it down below based on each piece of equipment.

How to Clean a Snorkeling Mask

To prevent scratching or harming the lens on the mask, which might impair your ability to see underwater, always protect it.

To get rid of any dirt or seawater, rinse your mask as soon as you can with fresh water

Put a silicone-based cleaning solution or warm water with mild dish soap in a sink to soak your snorkeling mask. (Avoid using petrolatum or alcohol.) The water shouldn’t be too hot, so check. If so, it could change the mask’s form.

  • Make sure there is no sand or other dirt trapped behind the seal or throughout the snorkel mask by giving it a thorough wipe.
  • If you must scrape the mask with something other than your hand to clean it, stick to a soft sponge.
  • Rinse well with new clean water.
  • Dry entirely with a soft towel, then place it out of the sun to air dry.
  • The mask should be kept in case of the sun and heat.
  • Mold and bacteria are the most prevalent contaminants in snorkels. You have to stop the snorkel tube from growing. Inhaling it might be harmful to your health!

Although this approach is quite similar to how to clean a mask, getting inside the tube without a special instrument might be challenging. The main variations are hotter water and more time spent soaking the snorkel tube.

To get rid of any dirt and seawater, rinse your mask as soon as you can with fresh water. Verify every component and nook!

In warm water with a moderate dish soap or detergent, soak your snorkeling mask. Additionally, you might mix vinegar and water.

Read Also: Best Smartwatches For Scuba Diving and Snorkeling

Spend five to ten minutes soaking the snorkel in the solution.

You might use a toothbrush to remove any last particles. The breathing tube may best be cleaned with a toothbrush.

Rinse well with brand-new water.

Dry well with a soft towel before allowing air to dry entirely out of the sun.

The snorkel tube should be kept in a ventilated bag in a cool, dry location out of direct sunlight.

How to Clean Snorkeling Fins

Image of a Snorkel Fin
Snorkeling Fins
 
  • Rinse your fins with fresh water as soon as you can to get rid of any saltwater or debris. Remember to empty the foot pockets!
  • Your fins should be submerged in a pail of warm, soapy water.
  • To remove any leftover dirt, scrub the fins with a soft sponge.
  • Use fresh water to thoroughly rinse.
  • Dry well with a soft towel before allowing air to dry entirely out of the sun. Dry the foot pockets thoroughly!
  • Laying the fins down or hanging them up away from sunlight will help preserve the blades of the fins in good condition.

Read Also: How To Skydive as a beginner and things to know

If your machinery is corroding, immerse it in a solution of vinegar and water. Rinse everything well in fresh water after soaking for a few minutes. Be sure to thoroughly rinse the vinegar.

How To Clean wetsuits

Image of a Snorkel wet suits
Snorkeling wetsuits
 

You might require extra equipment, such as a wetsuit or rash guard, depending on where you plan to snorkel. Scuba divers frequently use wetsuits, and in cold-water regions, snorkeling is also prohibited without one.

  • Your wetsuit has to be properly washed, dried, and stored after each use, just like the rest of your equipment.
  • After use, at the very least, clean your wetsuit inside and out with fresh water.
  • If at all feasible, soak the wetsuit for at least 30 minutes in freshwater before changing the water and repeating.
  • Never wring out the water or knead the wetsuit. The neoprene will ultimately lose its structural integrity if this is done, leaving it worthless.

Use clean water to rinse.

Turn the suit inside out and hang it up on a broad plastic or wooden hanger to dry it. Avoid using thin, wire hangers because they cause the fabric to fold and cut into it. Dry in the shade and space with good ventilation.

Give the wetsuit a thorough cleaning before putting it away if you won’t be using it for a long.

Read Also: Is Skiing Dangerous For Beginners 5 Top Tips to Know

Put it in a tub of warm water with either specialized wetsuit soap or a delicates-friendly detergent, like Woolite and soak it for a few hours. Repeat the soak with fresh water, then give everything a good rinse. To dry and store the wetsuit, go to step 5.

How To Clean Snorkel vest

Image of a Snorkel vest
Snorkeling Vest
 

Although they are not necessary for snorkeling, many individuals like the flexible buoyancy and relaxation that a snorkel vest provides. Cleaning these floatation devices is simple.

  • After each usage, rinse the vest with fresh water and let it air dry.
  • Keep a close eye on the inflation valve since sand and other debris can collect there and hinder the valve’s operation.
  1. The snorkel vest should be completely cleaned with mild detergent and warm or cool water before being stored for a lengthy period, such as in the winter.

Allow it to fully dry before storing to prevent the growth of mold and mildew. While it’s not advised, you can store the vest completely deflated if you must.

Read Also: Difference between Snorkeling and Scuba Diving

If you find mold growing on your snorkel or if it has been in storage for a while, you may need to thoroughly clean it with bleach to effectively disinfect it.

  • Blend one spoonful of bleach with a gallon of warm water.
  • Immerse the snorkel in the bleach solution for up to 30 minutes.
  • Completely rinse with running water.
  • Utilizing just air, dry the snorkel.

Getting your mask ready for the first time

Many glass-lens snorkel masks have a silicone covering that was left over from the manufacturing process.1 Even if you apply an anti-fog solution on the mask, this film might create fogging while you’re underwater.

To get rid of the coating and have your new mask ready for usage, you’ll need to perform the following:

  • To make sure your fingers are clean and free of contaminants, wash and dry your hands.
  • Ensure that the glasses and mask are both dry.
  • Avoid the gel kind of toothpaste when using a pea-sized drop on the mask and rubbing it with your fingertips on both sides of the lens.
  • Apply soft circular movements.
  • Rinse the mask, then use your fingers to gently rub the toothpaste off the lenses.
  • Extra care should be used to clean any toothpaste that is gathered along the borders.
  • If necessary, you may assist with the removal of the toothpaste by using a soft, wet towel (microfiber works excellently).
  • To remove any leftovers, give the mask one more rinse.
  • Repeat these instructions 5-7 times after drying the lens.

Apply a defogging substance to the interior of the lens, such as baby shampoo, mild, biodegradable dish detergent, or a commercial anti-fog solution. You should use your finger to gently rub the defogger around the lens before giving it a quick rinse with fresh water, being sure to leave a thin coating within the glass. Perform this procedure once again before each snorkeling trip.

This material is easily scratched and does not respond well to fingernails or toothpaste. There is no need to pre-treat certain plastic lenses because they already contain anti-fog coatings.

Read Also: Top 6 Snorkeling Tips For Beginners

Read the users manual or the manufacturer’s website to make sure you don’t damage your mask when preparing it.

Conclusion

Knowing how to properly maintain your snorkeling gear is crucial. Water includes a range of bacteria and germs that are hidden from view without a microscope, in addition to sand, seaweed, and other obvious debris. Even salt water might harm your equipment if it isn’t kept up with correctly. If you look after your snorkeling equipment, you might be able to put off getting new gear for a very long time!

Geat

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top